ZW180 (NEW)
Standard equipment may vary by country, so please consult your HITACHI dealer for details.
ENGINE
-
Coolant recovery tank
-
Hydraulically operated cooling fan with heat sensing system
-
Fan guard
-
Muffler, under hood with large exhaust stack
-
Environmentally friendly engine oil drain
-
Engine oil cooler
-
Quick-release fuel double filter with water separator function
-
Air heater (for cold start)
-
Air filter double element
-
TT (Total Torque-control) system
POWER TRAIN
-
Automatic transmission with load-sensing system
-
DSS (Down-Shift Switch) and USS (Up-Shift Switch)
-
Torque proportional differentials, front and rear
-
Driving mode selector switch, three modes
-
Clutch cut-off position switch, three position
HYDRAULIC SYSTEM
-
TT (Total Torque-control) system
-
Bucket auto leveler
-
Lift Arm kick-out system
-
Float system
-
Reservoir sight gauge
-
Hydraulic filters, vertical mounting
-
Two-spool main control valve
-
Multi-function joystick lever
-
O-Ring seal joints
ELECTRICAL
-
24-volt electrical system
-
Standard batteries (2), 12 volt with 1 005 CCA, 140 Ah
-
Alternator, 65 A and 24-volts
-
Lights: driving with guards, turn signals with hazard switch, stop and tail lights
-
Work lights on cab, front (2)
-
Work lights, rear (2)
-
Horn, with push button in center of steering wheel and switch on joystick lever knob or right console
-
Reverse warning alarm
-
Monitor and alarm system, multi-function electronic audible and visual warning include
-
LCD monitor display: Speedometer, clock, hour-meter, fuel consumption, odometer, replacement intervals, transmission auto, clutch cut off, ride control, gear shift
-
Gauges: engine coolant temperature, transmission oil temperature, fuel level
-
Warning lights: engine, transmission, discharge warning
-
Indicator lights: turn signals, high beam, working lights, service, parking brake, stop, brake oil low pressure, brake oil low level, seat belt, glow signal, maintenance, forward/reverse switch, water separator, over heat, engine oil low pressure, air filter restriction, transmission oil filter restriction, hydraulic oil temperature, transmission oil temperature
-
24-volt AM/FM stereo radio with clock
OPERATOR?S STATION
-
Cab
-
ROPS*, FOPS**, multi-plane isolation mounted for noise, vibration reduction, front and rear windshield washers, safety glass
-
Adjustable armrest
-
Bi-Level Auto Air Conditioner and Pressurize
-
Front / Rear Defroster
-
Hot and cool box
-
Sun visor
-
Seat (Grammer), fabric, high back, air suspension, seat heating, adjustable for weight-height, fore-aft position, backrest tilt, armrest angle, seat cushion length and angle, headrest height and angle adjustment, and lumber support
-
Seatback pocket
-
Retractable seat belt, 50 mm
-
Large tray and cup holder
-
Rubber floor mat
-
Adjustable steering column
-
Steering wheel, textured with spinner knob
-
Rear view mirrors, outside (2) and inside (2)
-
Handholds and steps, ergonomically located and slip resistant
-
Coat hook
Note: *: ROPS (Roll Over Protective Structure) Conforms to ISO 3471:1994
**: FOPS (Falling Objects Protective Structure) Conforms to ISO 3449:1992 Level ll
LOADER LINKAGE
-
Z-bar loader linkage provides (High bucket breakout)
BUCKETS AND ATTACHMENTS
-
General purpose bucket with bolt-on cutting edges: 2.8 m³ (ISO heaped)
TIRES
-
Radial ply: 20.5R25 (L3)
-
Multi-piece rims
OTHERS
-
Emergency Steering
-
Fenders, front and rear
-
Articulation locking bar
-
Anti-vandal protection, includes lockable engine enclosure, and fuel fill
-
Counterweight, built-in
-
Drawbar, with rocking pin
-
Lift and tie-down hooks
-
Open type rear grill
OPTIONAL EQUIPMENT
Optional equipment may vary by country, so please consult your HITACHI dealer for details.
POWER TRAIN
-
Limited slip differential
HYDRAULIC SYSTEM
-
Two-lever (Fingertip control type)
-
Three-spool main control valve
-
Third spool piping
-
Multi-function joystick lever and auxiliary lever for third function
-
Two-lever and auxiliary lever for third function
-
Lift arm Auto Leveler
-
Ride control system, automatic type
ELECTRICAL
-
Rear Working Lamp on Cab (2)
-
Front Working Lamps on Cab (2)
BUCKETS
-
General purpose bucket with bolt on cutting edge: 2.6 m3 (ISO heaped)
-
General purpose bucket with bolt on teeth: 2.5 m3 (ISO heaped)
-
General purpose bucket with weld on teeth: 2.5 m3 (ISO heaped)
-
General purpose bucket with bolt on teeth: 2.7 m3 (ISO heaped)
-
General purpose bucket with weld on teeth: 2.7 m3 (ISO heaped)
-
General purpose bucket with bolt on cutting edge: 3.1 m3 (ISO heaped)
-
General purpose bucket with bolt on teeth: 3.0 m3 (ISO heaped)
-
General purpose bucket with weld on teeth: 3.0 m3 (ISO heaped)
-
Flat bottom bucket with bolt on cutting edge: 2.6 m3 (ISO heaped)
-
Flat bottom bucket with bolt on teeth: 2.5 m3 (ISO heaped)
-
Flat bottom bucket with weld on teeth: 2.5 m3 (ISO heaped)
-
Flat bottom bucket with bolt on cutting edge: 2.8 m3 (ISO heaped)
-
Flat bottom bucket with bolt on teeth: 2.7 m3 (ISO heaped)
-
Flat bottom bucket with weld on teeth: 2.7 m3 (ISO heaped)
-
Flat bottom bucket with bolt on cutting edge: 3.1 m3 (ISO heaped)
-
Flat bottom bucket with bolt on teeth: 3.0 m3 (ISO heaped)
-
Flat bottom bucket with weld on teeth: 3.0 m3 (ISO heaped)
OTHERS
-
Full rear fender and mud guard
-
Biodegradable hydraulic oil
-
Cutting edge protection (German road homologation)
-
Italian road homologation kit
-
Rear license plate bracket
-
Wheel blocks
In order to read a PDF file, you need to have Adobe Reader installed in your computer.
