Standard equipment may vary by country, so please consult your HITACHI dealer for details.
ENGINE
Coolant recovery tank
Hydraulically operated cooling fan with heat sensing system
Fan guard
Muffler, under hood with large exhaust stack
Environmentally friendly engine oil drain
Engine oil cooler
Quick-release fuel double filter with water separator function
Glow system (for cold start)
Air filter double element
TT (Total Torque-control) system
POWER TRAIN
Automatic transmission with load sensing system
DSS (Down-Shift Switch) and USS (Up-Shift Switch)
Torque proportional differentials, front and rear
Driving mode selector switch, three modes
Clutch cut-off position switch, three position
HYDRAULIC SYSTEM
TT (Total Torque-control) system
Multi-function joystick lever
Bucket auto leveler
Lift Arm kick-out system
Float system
Reservoir sight gauge
Hydraulic filters, vertical mounting
Two-spool main control valve
O-Ring seal joints
Ride control system, automatic type
ELECTRICAL
24-volt electrical system
Standard batteries (2), 12 volt with 916 CCA, 270-min. rated reserve
Alternator, 50 amps and 24 volts
Lights: driving with guards, turn signals with hazard switch, stop and tail lights
Work lights on cab, front (2)
Work lights, rear (2)
Horn, with push button in center of steering wheel and switch on joystick lever knob or right console
Reverse warning alarm
Monitor and alarm system, multifunction electronic audible and visual warning include
LCD monitor display: speedometer, clock, hour-meter, fuel consumption, odometer, replacement intervals, transmission
auto, clutch cut off, ride control, gear shift
Gauges: engine coolant temperature, transmission oil temperature, fuel level
Warning lights: engine, transmission, discharge warning
Indicator lights: turn signals, high beam, working lights, service, parking brake, stop, brake oil low pressure, brake oil low level, seat belt, glow signal, maintenance, forward/reverse switch, water separator, over heat, engine oil low pressure, air filter restriction, transmission oil filter restriction, hydraulic oil temperature, transmission oil temperature
24-volt AM/FM stereo radio with clock
OPERATOR?S STATION
Cab
ROPS*, FOPS**, multi-plane isolation mounted for noise, vibration reduction, front and rear windshield washers, safety glass
Adjustable armrest
Bi-Level Auto Air Conditioner and Pressurize
Front / Rear Defroster
Hot and cool box
Sun visor
Seat, fabric, high back, air suspension, seat heating, adjustable for weight-height, fore-aft position, backrest tilt, armrest angle, seat cushion length and angle, headrest height and angle adjustment, and lumber support
Seatback pocket
Retractable seat belt, 50 mm (2")
Large tray and cup holder
Rubber floor mat
Adjustable steering column
Steering wheel, textured with spinner knob
Rear view mirrors, outside (2) and inside (2)
Handholds and steps, ergonomically located and slip esistant
Coat hook
Note: *: ROPS (Roll Over Protective Structure) Conforms to ISO 3471:1994
**: FOPS (Falling Objects Protective Structure) Conforms to ISO 3449:1992 Level ll
LOADER LINKAGE
Z-bar loader linkage provides (High bucket breakout)
BUCKETS AND ATTACHMENTS
General purpose bucket with bolt-on cutting edges: 3.3 m3 (ISO heaped)
TIRES
Radial ply: 23.5R25 (L3)
Multi-piece rims
OTHERS
Emergency Steering
Fenders, front and rear
Articulation locking bar
Anti-vandal protection, includes lockable engine enclosure, and fuel fill
Counterweight, built-in
Drawbar, with rocking pin
Lift and tie-down hooks
Open type rear grill
Optional equipment may vary by country, so please consult your HITACHI dealer for details.
POWER TRAIN
Limited slip differential
HYDRAULIC SYSTEM
Three-spool main control valve
Third spool piping
Two-lever (Fingertip control type)
Multi-function joystick lever and auxiliary lever for third function
Two-lever and auxiliary lever for third function
Lift arm Auto Leveler
ELECTRICAL
Rear Working Lamp on Cab (2)
Rotary beacon lamp
BUCKETS
General purpose bucket with bolt on teeth: 3.4 m3 (ISO heaped)
General purpose bucket with weld on teeth: 3.4 m3 (ISO heaped)
Flat bottom bucket with bolt on cutting edge: 3.6 m3 (ISO heaped)
Flat bottom bucket with weld on teeth: 3.4 m3 (ISO heaped)
Flat bottom bucket with bolt on teeth: 3.4 m3 (ISO heaped)
Rock bucket with bolt on teeth: 2.8 m3 (ISO heaped)
Light material round bottom bucket with bolt-on cutting edges: 3.8 m3 (ISO heaped)
Light material flat bottom bucket with bolt-on cutting edges: 3.8 m3 (ISO heaped)
OTHERS
Full rear fender and mud guard
Cutting edge protection (German road homologation)
Italian road homologation kit
Rear license plate bracket
Wheel blocks
Biodegradable hydraulic oil