ZW220
Features
Standard & Optional Equipment
Standard equipment may vary by country, so please consult your HITACHI dealer for details.
ENGINE
- Coolant recovery tank
- Hydraulically operated cooling fan with heat sensing system
- Fan guard
- Muffler, under hood with large exhaust stack
- Environmentally friendly engine oil drain
- Engine oil cooler
- Quick-release fuel double filter with water separator function
- Glow system (for cold start)
- Air fi lter double element
- TT (Total Torque-control) system
POWER TRAIN
- Automatic transmission with load-sensing system
- DSS (Down-Shift Switch) and USS (Up-Shift Switch)
- Torque proportional differentials, front and rear
- Driving mode selector switch, three modes
- Clutch cut-off position switch, three position
HYDRAULIC SYSTEM
- TT (Total Torque-control) system
- Multi-function joystick lever
- Bucket auto leveler
- Lift Arm kick-out system
- Float system
- Reservoir sight gauge
- Hydraulic filters, vertical mounting
- Two-spool main control valve
- O-Ring seal joints
- Ride control system, automatic type
ELECTRICAL
- 24-volt electrical system
- Standard batteries (2), 12 volt with 916 CCA, 270-min. rated reserve
- Alternator, 50 amps and 24 volts
- Lights: driving with guards, turn signals with hazard switch, stop and tail lights
- Work lights on cab, front (2)
- Work lights, rear (2)
- Horn, with push button in center of steering wheel and switch on joystick lever knob or right console
- Reverse warning alarm
- Monitor and alarm system, multi-function electronic audible and visual warning include
- LCD monitor display: Speedometer, clock, hour-meter, fuel consumption, odometer, replacement intervals, transmission auto, clutch cut off, ride control, gear shift
- Gauges: engine coolant temperature, transmission oil temperature, fuel level
- Warning lights: engine, transmission, discharge warning
- Indicator lights: turn signals, high beam, working lights, service, parking brake, stop, brake oil low pressure, brake oil low level, seat belt, glow signal, maintenance, forward/reverse switch, water separator, over heat, engine oil low pressure, air filter restriction, transmission oil filter restriction, hydraulic oil temperature, transmission oil temperature
- 24-volt AM/FM stereo radio with clock
OPERATOR?S STATION
- Cab
- ROPS*, FOPS**, multi-plane isolation mounted for noise, vibration reduction, front and rear windshield washers, safety glass
- Adjustable armrest
- Bi-Level Auto Air Conditioner and Pressurize
- Front / Rear Defroster
- Hot and cool box
- Sun visor
- Seat, fabric, high back, air suspension, seat heating, adjustable for weight-height, fore-aft position, backrest tilt, armrest angle, seat cushion length and angle, headrest height and angle adjustment, and lumber support
- Seatback pocket
- Retractable seat belt, 50 mm (2")
- Large tray and cup holder
- Rubber fl oor mat
- Adjustable steering column
- Steering wheel, textured with spinner knob
- Rear view mirrors, outside (2) and inside (2)
- Handholds and steps, ergonomically located and slip resistant
- Coat hook
Note: *: ROPS (Roll Over Protective Structure) Conforms to ISO 3471:1994
**: FOPS (Falling Objects Protective Structure) Conforms to ISO 3449:1992 Level ll
LOADER LINKAGE
- Z-bar loader linkage provides (High bucket breakout)
BUCKETS AND ATTACHMENTS
- General purpose bucket with bolt-on cutting edges: 3.3 m3 (ISO heaped)
TIRES
- Radial ply: 23.5R25 (L3)
- Multi-piece rims
OTHERS
- Emergency Steering
- Fenders, front and rear
- Articulation locking bar
- Anti-vandal protection, includes lockable engine enclosure, and fuel fill
- Counterweight, built-in
- Drawbar, with rocking pin
- Lift and tie-down hooks
- Open type rear grill
OPTIONAL EQUIPMENT
Optional equipment may vary by country, so please consult your HITACHI dealer for details.
POWER TRAIN
- Limited slip differential
HYDRAULIC SYSTEM
- Three-spool main control valve
- Third spool piping
- Two-lever (Fingertip control type)
- Multi-function joystick lever and auxiliary lever for third function
- Two-lever and auxiliary lever for third function
- Lift arm Auto Leveler
ELECTRICAL
- Rear Working Lamp on Cab (2)
- Rotary beacon lamp
BUCKETS
- General purpose bucket with bolt on teeth: 3.1 m3 (ISO heaped)
- General purpose bucket with weld on teeth: 3.1 m3 (ISO heaped)
- Flat bottom bucket with bolt on cutting edge: 3.3 m3 (ISO heaped)
- Flat bottom bucket with weld on teeth: 3.1 m3 (ISO heaped)
- Flat bottom bucket with bolt on teeth: 3.1 m3 (ISO heaped)
- Rock bucket with bolt on teeth: 2.4 m3 (ISO heaped)
- Light material round bottom bucket with bolt-on cutting edges: 3.5 m3 (ISO heaped)
- Light material fl at bottom bucket with bolt-on cutting edges: 3.5 m3 (ISO heaped)
OTHERS
- Full rear fender and mud guard
- Cutting edge protection (German road homologation)
- Italian road homologation kit
- Rear license plate bracket
- Wheel blocks
- Biodegradable hydraulic oil

Specifications
|
MODEL |
|
|
Engine rated power (kW) DIN 6271, net |
164.0 |
|
Operating weight (kg) |
18 180 |
|
Bucket capacity (m³) ISO Heaped |
2.4 - 3.5 |
|
Breakout force (kN)* |
153.9 |
*General purpose bucket: 3.3 m3 with bolt-on edges
In order to read a PDF file, you need to have Adobe Reader
installed in your computer.