HITACHI CONSTRUCTION MACHINERY

Standard equipment may vary by country, so please consult your HITACHI dealer for details.

ENGINE

• Coolant recovery tank
• Hydraulically operated cooling fan with heat sensing system
• Fan guard
• Muffler, under hood with large exhaust stack
• Environmentally friendly engine oil drain
• Engine oil cooler
• Quick-release fuel double filter with water separator function
• Air heater (for cold start)
• Air filter double element
• TT (Total Torque-control) system

POWER TRAIN

• Automatic transmission with load-sensing system
• DSS (Down-Shift Switch) and USS (Up-Shift Switch)
• Torque proportional differentials, front and rear
• Driving mode selector switch, three modes
• Clutch cut-off position switch, three position

HYDRAULIC SYSTEM

• TT (Total Torque-control) system
• Bucket auto leveler
• Lift Arm kick-out system
• Float system
• Reservoir sight gauge
• Hydraulic filters, vertical mounting
• Two-spool main control valve
• Multi-function joystick lever
• O-Ring seal joints

ELECTRICAL

• 24-volt electrical system
• Standard batteries (2), 12 volt with 1 005 CCA, 140 Ah
• Alternator, 65 A and 24-volts
• Lights: driving with guards, turn signals with hazard switch, stop and tail lights
• Work lights on cab, front (2)
• Work lights, rear (2)
• Horn, with push button in center of steering wheel and switch on joystick lever knob or right console
• Reverse warning alarm
• Monitor and alarm system, multi-function electronic audible and visual warning include
• LCD monitor display: Speedometer, clock, hour-meter, fuel consumption, odometer, replacement intervals, transmission auto, clutch cut off, ride control, gear shift
• Gauges: engine coolant temperature, transmission oil temperature, fuel level
• Warning lights: engine, transmission, discharge warning
• Indicator lights: turn signals, high beam, working lights, service, parking brake, stop, brake oil low pressure, brake oil low level, seat belt, glow signal, maintenance, forward/reverse switch, water separator, over heat, engine oil low pressure, air filter restriction, transmission oil filter restriction, hydraulic oil temperature, transmission oil temperature
• 24-volt AM/FM stereo radio with clock

OPERATOR?S STATION

• Cab
• ROPS*, FOPS**, multi-plane isolation mounted for noise, vibration reduction, front and rear windshield washers, safety glass
• Adjustable armrest
• Bi-Level Auto Air Conditioner and Pressurize
• Front / Rear Defroster
• Hot and cool box
• Sun visor
• Seat (Grammer), fabric, high back, air suspension, seat heating, adjustable for weight-height, fore-aft position, backrest tilt, armrest angle, seat cushion length and angle, headrest height and angle adjustment, and lumber support
• Seatback pocket
• Retractable seat belt, 50 mm
• Large tray and cup holder
• Rubber floor mat
• Adjustable steering column
• Steering wheel, textured with spinner knob
• Rear view mirrors, outside (2) and inside (2)
• Handholds and steps, ergonomically located and slip resistant
• Coat hook

Note: *: ROPS (Roll Over Protective Structure) Conforms to ISO 3471:1994
**: FOPS (Falling Objects Protective Structure) Conforms to ISO 3449:1992 Level ll

LOADER LINKAGE

• Z-bar loader linkage provides (High bucket breakout)

BUCKETS AND ATTACHMENTS

• General purpose bucket with bolt-on cutting edges: 2.8 m³ (ISO heaped)

TIRES

• Radial ply: 20.5R25 (L3)
• Multi-piece rims

OTHERS

• Emergency Steering
• Fenders, front and rear
• Articulation locking bar
• Anti-vandal protection, includes lockable engine enclosure, and fuel fill
• Counterweight, built-in
• Drawbar, with rocking pin
• Lift and tie-down hooks
• Open type rear grill

Optional equipment may vary by country, so please consult your HITACHI dealer for details.

POWER TRAIN

• Limited slip differential

HYDRAULIC SYSTEM

• Two-lever (Fingertip control type)
• Three-spool main control valve
• Third spool piping
• Multi-function joystick lever and auxiliary lever for third function
• Two-lever and auxiliary lever for third function
• Lift arm Auto Leveler
• Ride control system, automatic type

ELECTRICAL

• Rear Working Lamp on Cab (2)
• Front Working Lamps on Cab (2)

BUCKETS

• General purpose bucket with bolt on cutting edge: 2.6 m3 (ISO heaped)
• General purpose bucket with bolt on teeth: 2.5 m3 (ISO heaped)
• General purpose bucket with weld on teeth: 2.5 m3 (ISO heaped)
• General purpose bucket with bolt on teeth: 2.7 m3 (ISO heaped)
• General purpose bucket with weld on teeth: 2.7 m3 (ISO heaped)
• General purpose bucket with bolt on cutting edge: 3.1 m3 (ISO heaped)
• General purpose bucket with bolt on teeth: 3.0 m3 (ISO heaped)
• General purpose bucket with weld on teeth: 3.0 m3 (ISO heaped)
• Flat bottom bucket with bolt on cutting edge: 2.6 m3 (ISO heaped)
• Flat bottom bucket with bolt on teeth: 2.5 m3 (ISO heaped)
• Flat bottom bucket with weld on teeth: 2.5 m3 (ISO heaped)
• Flat bottom bucket with bolt on cutting edge: 2.8 m3 (ISO heaped)
• Flat bottom bucket with bolt on teeth: 2.7 m3 (ISO heaped)
• Flat bottom bucket with weld on teeth: 2.7 m3 (ISO heaped)
• Flat bottom bucket with bolt on cutting edge: 3.1 m3 (ISO heaped)
• Flat bottom bucket with bolt on teeth: 3.0 m3 (ISO heaped)
• Flat bottom bucket with weld on teeth: 3.0 m3 (ISO heaped)

OTHERS

• Full rear fender and mud guard
• Biodegradable hydraulic oil
• Cutting edge protection (German road homologation)
• Italian road homologation kit
• Rear license plate bracket
• Wheel blocks

Feature Top